The principle of infrared touch screen is to form X, r matrix by the emission and reception of infrared rays. When the infrared rays are blocked by the contact object at a specific position, the position of the contact object (such as finger) can be calculated. The infrared touch screen is mainly used in large size and multiple Point touch, but high power consumption and poor resolution.
High-resolution infrared technology uses a small frame around the display, with surface-mounted LEDs on it, a light sensor on the opposite side, and an infrared transparent frame hidden behind it. The controller continuously sends LED beams to construct an infrared light scanning grid. One or more infrared light on each axis will be blocked when touched, so that the corresponding X and F coordinates can be determined. Infrared touch screens are inexpensive, but the outer frame is fragile, which is prone to light interference and distortion in the case of curved surfaces.
At present, the commercialized touch screen technology has its own characteristics. The application of touch screen technology in mobile phones mainly adopts two types of resistive and capacitive touch screens. Although the working principles of these two touch screens are different, their structure and form have many similarities. Where, it is a combination of multilayer PET film, ITO glass, and double-sided adhesive layer.
Each touch method is advancing multi-touch, large-scale, thin and light-weight, but none of them is a universal method suitable for all applications. It is very important to choose and flexibly use the method that matches the purpose of the product.
Various methods of touch screen have their own advantages and disadvantages. The method with higher position detection resolution makes it difficult to enlarge; the method that is easy to enlarge has lower resolution. The priority order of requirements such as resolution and supported screen size varies depending on the use of the touch screen. Therefore, a correct understanding of the advantages and disadvantages of various methods of touch screens is the first step to flexibly use touch screens. On this basis, it is also very important to select the touch screen according to the envisaged use requirements in the order of priority.
Infrared detection technology used in touch screen technology mainly has 3 technical difficulties:
1. Ambient light factors. The infrared receiver tube has a working range between the minimum sensitivity and maximum illuminance, but touch screen products cannot limit the range of use, from dark karaoke private rooms to outdoor use under high-intensity sunlight in Hainan Island. As a product, It must be adapted to the fact that infrared screen manufacturers that can resist direct sunlight have gradually emerged on the market.
2. Response speed. Since 2008, infrared technology has developed rapidly, and the response speed has been below 15ms.
3. Signal diffraction, surrounding reflection, refraction, and interference. The infrared transmitter tube has a launch angle, and the receiver tube has a larger receiving angle. If the surrounding reflection reaches a certain level, the signal cannot be blocked by the finger. Proper adjustment of power can achieve precise touch.
In order to better solve the above problems, the biggest advantage of choosing the analog mode is that it can analyze and improve the resolution of the touch screen, but the anti-interference ability is not as good as the pulse method; although the pulse method has strong anti-interference ability, there is a pulse method that needs to be used by the receiver. A response process time problem, but the touch screen requires extremely fast speed, so there must be technological breakthroughs in several aspects such as adaptive circuit, single-chip software, mold design, and light-transmitting material selection.

