1. PCB'nin rengi performansla ilgilidir.
Regarding the color of PCB, there has always been a saying that "green is not as good as red, red is not as good as blue, and blue is not as good as black". In fact, this is a big misunderstanding. The reason why the PCB circuit board has different colors is that the color of the solder resist brushed on it is different, and the difference in the color of the solder resist does not affect the actual performance.
2, it is good to choose all solid state.
Bu da yanlış anlaşılmalardan biridir. Aslında, katı kapasitörler, yüksek sıcaklık direnci açısından orijinal elektrolitik kapasitörlerden gerçekten daha iyidir, ancak kapasitörler, anakart üzerindeki bileşenlerin kararlılığını korumak için kullanılır. Anakart üzerinde yüksek sıcaklıklara neden olabilecek tek bileşen kuzey köprüsüdür. , CPU, grafik kartı, bu konumlar dışında diğer konumlarda katı kapasitör kullanmaya gerek yoktur.
Now when buying a motherboard, choose a motherboard with a price similar to that of the CPU and graphics card. The price should not be too high, and the materials should not be too luxurious. The locations that I know of using solid capacitors are near the CPU, near the PCI-E interface of the graphics card, near the memory, and other locations such as integrated sound cards, network cards, etc., using solid capacitors is not luxurious, it is pure waste.
3. The CPU and graphics card must be good, as long as the motherboard can make these components light up.
This is also one of the misunderstandings. Under normal circumstances, the price of the motherboard of the integrated display is slightly lower than that of the motherboard for the independent display. This is often not only caused by the small board, but also the performance of the chipset and the power supply design of each interface, especially the power supply of the CPU. The number of modules, the low-end integrated display board basically does not exceed 6 phases, which causes the filtering requirements of the high-end U to not fully meet, and sometimes even causes the CPU to run at a high temperature. These consequences have an impact on the life of the machine itself.
In fact, small board size also has disadvantages for heat dissipation. Because of the small board size, the interfaces of each component are designed to be relatively close. Like mid-to-high-end CPUs and mid-to-high-end graphics cards, if they are too close together, they will definitely cause poor heat dissipation. , Coupled with the saving of materials, double high temperature can't afford even the best hardware.

